Previously, `CodexAuth` was defined as follows:
d550fbf41a/codex-rs/core/src/auth.rs (L39-L46)
But if you looked at its constructors, we had creation for
`AuthMode::ApiKey` where `storage` was built using a nonsensical path
(`PathBuf::new()`) and `auth_dot_json` was `None`:
d550fbf41a/codex-rs/core/src/auth.rs (L212-L220)
By comparison, when `AuthMode::ChatGPT` was used, `api_key` was always
`None`:
d550fbf41a/codex-rs/core/src/auth.rs (L665-L671)https://github.com/openai/codex/pull/10012 took things further because
it introduced a new `ChatgptAuthTokens` variant to `AuthMode`, which is
important in when invoking `account/login/start` via the app server, but
most logic _internal_ to the app server should just reason about two
`AuthMode` variants: `ApiKey` and `ChatGPT`.
This PR tries to clean things up as follows:
- `LoginAccountParams` and `AuthMode` in `codex-rs/app-server-protocol/`
both continue to have the `ChatgptAuthTokens` variant, though it is used
exclusively for the on-the-wire messaging.
- `codex-rs/core/src/auth.rs` now has its own `AuthMode` enum, which
only has two variants: `ApiKey` and `ChatGPT`.
- `CodexAuth` has been changed from a struct to an enum. It is a
disjoint union where each variant (`ApiKey`, `ChatGpt`, and
`ChatGptAuthTokens`) have only the associated fields that make sense for
that variant.
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/openai/codex/pull/10208).
* #10224
* __->__ #10208
Load requirements from Codex Backend. It only does this for enterprise
customers signed in with ChatGPT.
Todo in follow-up PRs:
* Add to app-server and exec too
* Switch from fail-open to fail-closed on failure
Session renaming:
- `/rename my_session`
- `/rename` without arg and passing an argument in `customViewPrompt`
- AppExitInfo shows resume hint using the session name if set instead of
uuid, defaults to uuid if not set
- Names are stored in `CODEX_HOME/sessions.jsonl`
Session resuming:
- codex resume <name> lookup for `CODEX_HOME/sessions.jsonl` first entry
matching the name and resumes the session
---------
Co-authored-by: jif-oai <jif@openai.com>
# Summary
- Fix resume/fork config rebuild so cwd changes inside the TUI produce a
fully rebuilt Config (trust/approval/sandbox) instead of mutating only
the cwd.
- Preserve `--add-dir` behavior across resume/fork by normalizing
relative roots to absolute paths once (based on the original cwd).
- Prefer latest `TurnContext.cwd` for resume/fork prompts but fall back
to `SessionMeta.cwd` if the latest cwd no longer exists.
- Align resume/fork selection handling and ensure UI config matches the
resumed thread config.
- Fix Windows test TOML path escaping in trust-level test.
# Details
- Rebuild Config via `ConfigBuilder` when resuming into a different cwd;
carry forward runtime approval/sandbox overrides.
- Add `normalize_harness_overrides_for_cwd` to resolve relative
`additional_writable_roots` against the initial cwd before reuse.
- Guard `read_session_cwd` with filesystem existence check for the
latest `TurnContext.cwd`.
- Update naming/flow around cwd comparison and prompt selection.
<img width="603" height="150" alt="Screenshot 2026-01-23 at 5 42 13 PM"
src="https://github.com/user-attachments/assets/d1897386-bb28-4e8a-98cf-187fdebbecb0"
/>
And proof the model understands the new cwd:
<img width="828" height="353" alt="Screenshot 2026-01-22 at 5 36 45 PM"
src="https://github.com/user-attachments/assets/12aed8ca-dec3-4b64-8dae-c6b8cff78387"
/>
In a [recent PR](https://github.com/openai/codex/pull/9182), I made some
improvements to config error messages so errors didn't leave app server
clients in a dead state. This is a follow-on PR to make these error
messages more readable and actionable for both TUI and GUI users. For
example, see #9668 where the user was understandably confused about the
source of the problem and how to fix it.
The improved error message:
1. Clearly identifies the config file where the error was found (which
is more important now that we support layered configs)
2. Provides a line and column number of the error
3. Displays the line where the error occurred and underlines it
For example, if my `config.toml` includes the following:
```toml
[features]
collaboration_modes = "true"
```
Here's the current CLI error message:
```
Error loading config.toml: invalid type: string "true", expected a boolean in `features`
```
And here's the improved message:
```
Error loading config.toml:
/Users/etraut/.codex/config.toml:43:23: invalid type: string "true", expected a boolean
|
43 | collaboration_modes = "true"
| ^^^^^^
```
The bulk of the new logic is contained within a new module
`config_loader/diagnostics.rs` that is responsible for calculating the
text range for a given toml path (which is more involved than I would
have expected).
In addition, this PR adds the file name and text range to the
`ConfigWarningNotification` app server struct. This allows GUI clients
to present the user with a better error message and an optional link to
open the errant config file. This was a suggestion from @.bolinfest when
he reviewed my previous PR.
This PR fixes a small issue with chained (layered) config.toml file
merging. The old logic didn't properly handle profiles.
In particular, if a lower-layer config overrides a profile defined in a
higher-layer config, the override did not take effect. This prevents
users from having project-specific profile overrides and contradicts the
(soon-to-be) documented behavior of config merging.
The change adds a unit test for this case. It also exposes a function
from the config crate that is needed by the app server code paths to
implement support for layered configs.
Add support for returning threads by either `created_at` OR `updated_at`
descending. Previously core always returned threads ordered by
`created_at`.
This PR:
- updates core to be able to list threads by `updated_at` OR
`created_at` descending based on what the caller wants
- also update `thread/list` in app-server to expose this (default to
`created_at` if not specified)
All existing codepaths (app-server, TUI) still default to `created_at`,
so no behavior change is expected with this PR.
**Implementation**
To sort by `updated_at` is a bit nontrivial (whereas `created_at` is
easy due to the way we structure the folders and filenames on disk,
which are all based on `created_at`).
The most naive way to do this without introducing a cache file or sqlite
DB (which we have to implement/maintain) is to scan files in reverse
`created_at` order on disk, and look at the file's mtime (last modified
timestamp according to the filesystem) until we reach `MAX_SCAN_FILES`
(currently set to 10,000). Then, we can return the most recent N
threads.
Based on some quick and dirty benchmarking on my machine with ~1000
rollout files, calling `thread/list` with limit 50, the `updated_at`
path is slower as expected due to all the I/O:
- updated-at: average 103.10 ms
- created-at: average 41.10 ms
Those absolute numbers aren't a big deal IMO, but we can certainly
optimize this in a followup if needed by introducing more state stored
on disk.
**Caveat**
There's also a limitation in that any files older than `MAX_SCAN_FILES`
will be excluded, which means if a user continues a REALLY old thread,
it's possible to not be included. In practice that should not be too big
of an issue.
If a user makes...
- 1000 rollouts/day → threads older than 10 days won't show up
- 100 rollouts/day → ~100 days
If this becomes a problem for some reason, even more motivation to
implement an updated_at cache.
This PR changes `codex resume --last` to work consistently with `codex
resume`. Namely, it filters based on the cwd when selecting the last
session. It also supports the `--all` modifier as an override.
This addresses #8700
### What
Add `WebSearchMode` enum (disabled, cached live, defaults to cached) to
config + V2 protocol. This enum takes precedence over legacy flags:
`web_search_cached`, `web_search_request`, and `tools.web_search`.
Keep `--search` as live.
### Tests
Added tests
When an invalid config.toml key or value is detected, the CLI currently
just quits. This leaves the VSCE in a dead state.
This PR changes the behavior to not quit and bubble up the config error
to users to make it actionable. It also surfaces errors related to
"rules" parsing.
This allows us to surface these errors to users in the VSCE, like this:
<img width="342" height="129" alt="Screenshot 2026-01-13 at 4 29 22 PM"
src="https://github.com/user-attachments/assets/a79ffbe7-7604-400c-a304-c5165b6eebc4"
/>
<img width="346" height="244" alt="Screenshot 2026-01-13 at 4 45 06 PM"
src="https://github.com/user-attachments/assets/de874f7c-16a2-4a95-8c6d-15f10482e67b"
/>
The underlying issue is that when we encountered an error starting a
conversation (any sort of error, though making `$CODEX_HOME/rules` a
file rather than folder was the example in #8803), then we were writing
the message to stderr, but this could be printed over by our UI
framework so the user would not see it. In general, we disallow the use
of `eprintln!()` in this part of the code for exactly this reason,
though this was suppressed by an `#[allow(clippy::print_stderr)]`.
This attempts to clean things up by changing `handle_event()` and
`handle_tui_event()` to return a `Result<AppRunControl>` instead of a
`Result<bool>`, which is a new type introduced in this PR (and depends
on `ExitReason`, also a new type):
```rust
#[derive(Debug)]
pub(crate) enum AppRunControl {
Continue,
Exit(ExitReason),
}
#[derive(Debug, Clone)]
pub enum ExitReason {
UserRequested,
Fatal(String),
}
```
This makes it possible to exit the primary control flow of the TUI with
richer information. This PR adds `ExitReason` to the existing
`AppExitInfo` struct and updates `handle_app_exit()` to print the error
and exit code `1` in the event of `ExitReason::Fatal`.
I tried to create an integration test for this, but it was a bit
involved, so I published it as a separate PR:
https://github.com/openai/codex/pull/9166. For this PR, please have
faith in my manual testing!
Fixes https://github.com/openai/codex/issues/8803.
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/openai/codex/pull/9011).
* #9166
* __->__ #9011
This is an alternate PR to solving the same problem as
<https://github.com/openai/codex/pull/8227>.
In this PR, when Ollama is used via `--oss` (or via `model_provider =
"ollama"`), we default it to use the Responses format. At runtime, we do
an Ollama version check, and if the version is older than when Responses
support was added to Ollama, we print out a warning.
Because there's no way of configuring the wire api for a built-in
provider, we temporarily add a new `oss_provider`/`model_provider`
called `"ollama-chat"` that will force the chat format.
Once the `"chat"` format is fully removed (see
<https://github.com/openai/codex/discussions/7782>), `ollama-chat` can
be removed as well
---------
Co-authored-by: Eric Traut <etraut@openai.com>
Co-authored-by: Michael Bolin <mbolin@openai.com>
Fixes#2558
Codex uses alternate screen mode (CSI 1049) which, per xterm spec,
doesn't support scrollback. Zellij follows this strictly, so users can't
scroll back through output.
**Changes:**
- Add `tui.alternate_screen` config: `auto` (default), `always`, `never`
- Add `--no-alt-screen` CLI flag
- Auto-detect Zellij and skip alt screen (uses existing `ZELLIJ` env var
detection)
**Usage:**
```bash
# CLI flag
codex --no-alt-screen
# Or in config.toml
[tui]
alternate_screen = "never"
```
With default `auto` mode, Zellij users get working scrollback without
any config changes.
---------
Co-authored-by: Josh McKinney <joshka@openai.com>
**Motivation**
The `originator` header is important for codex-backend’s Responses API
proxy because it identifies the real end client (codex cli, codex vscode
extension, codex exec, future IDEs) and is used to categorize requests
by client for our enterprise compliance API.
Today the `originator` header is set by either:
- the `CODEX_INTERNAL_ORIGINATOR_OVERRIDE` env var (our VSCode extension
does this)
- calling `set_default_originator()` which sets a global immutable
singleton (`codex exec` does this)
For `codex app-server`, we want the `initialize` JSON-RPC request to set
that header because it is a natural place to do so. Example:
```json
{
"method": "initialize",
"id": 0,
"params": {
"clientInfo": {
"name": "codex_vscode",
"title": "Codex VS Code Extension",
"version": "0.1.0"
}
}
}
```
and when app-server receives that request, it can call
`set_default_originator()`. This is a much more natural interface than
asking third party developers to set an env var.
One hiccup is that `originator()` reads the global singleton and locks
in the value, preventing a later `set_default_originator()` call from
setting it. This would be fine but is brittle, since any codepath that
calls `originator()` before app-server can process an `initialize`
JSON-RPC call would prevent app-server from setting it. This was
actually the case with OTEL initialization which runs on boot, but I
also saw this behavior in certain tests.
Instead, what we now do is:
- [unchanged] If `CODEX_INTERNAL_ORIGINATOR_OVERRIDE` env var is set,
`originator()` would return that value and `set_default_originator()`
with some other value does NOT override it.
- [new] If no env var is set, `originator()` would return the default
value which is `codex_cli_rs` UNTIL `set_default_originator()` is called
once, in which case it is set to the new value and becomes immutable.
Later calls to `set_default_originator()` returns
`SetOriginatorError::AlreadyInitialized`.
**Other notes**
- I updated `codex_core::otel_init::build_provider` to accepts a service
name override, and app-server sends a hardcoded `codex_app_server`
service name to distinguish it from `codex_cli_rs` used by default (e.g.
TUI).
**Next steps**
- Update VSCE to set the proper value for `clientInfo.name` on
`initialize` and drop the `CODEX_INTERNAL_ORIGINATOR_OVERRIDE` env var.
- Delete support for `CODEX_INTERNAL_ORIGINATOR_OVERRIDE` in codex-rs.
Historically we started with a CodexAuth that knew how to refresh it's
own tokens and then added AuthManager that did a different kind of
refresh (re-reading from disk).
I don't think it makes sense for both `CodexAuth` and `AuthManager` to
be mutable and contain behaviors.
Move all refresh logic into `AuthManager` and keep `CodexAuth` as a data
object.
Force an announcement tooltip in the CLI. This query the gh repo on this
[file](https://raw.githubusercontent.com/openai/codex/main/announcement_tip.toml)
which contains announcements in TOML looking like this:
```
# Example announcement tips for Codex TUI.
# Each [[announcements]] entry is evaluated in order; the last matching one is shown.
# Dates are UTC, formatted as YYYY-MM-DD. The from_date is inclusive and the to_date is exclusive.
# version_regex matches against the CLI version (env!("CARGO_PKG_VERSION")); omit to apply to all versions.
# target_app specify which app should display the announcement (cli, vsce, ...).
[[announcements]]
content = "Welcome to Codex! Check out the new onboarding flow."
from_date = "2024-10-01"
to_date = "2024-10-15"
version_regex = "^0\\.0\\.0$"
target_app = "cli"
```
To make this efficient, the announcement is queried on a best effort
basis at the launch of the CLI (no refresh made after this).
This is done in an async way and we display the announcement (with 100%
probability) iff the announcement is available, the cache is correctly
warmed and there is a matching announcement (matching is recomputed for
each new session).
with_target(true) is the default for tracing-subscriber, but we
previously disabled it for file output.
Keep it enabled so we can selectively enable specific targets/events at
runtime via RUST_LOG=..., and then grep by target/module in the log file
during troubleshooting.
before and after:
<img width="629" height="194" alt="image"
src="https://github.com/user-attachments/assets/33f7df3f-0c5d-4d3f-b7b7-80b03d4acd21"
/>
Add `ctrl+g` shortcut to enable opening current prompt in configured
editor (`$VISUAL` or `$EDITOR`).
- Prompt is updated with editor's content upon editor close.
- Paste placeholders are automatically expanded when opening the
external editor, and are not "recompressed" on close
- They could be preserved in the editor, but it would be hard to prevent
the user from modifying the placeholder text directly, which would drop
the mapping to the `pending_paste` value
- Image placeholders stay as-is
- `ctrl+g` explanation added to shortcuts menu, snapshot tests updated
https://github.com/user-attachments/assets/4ee05c81-fa49-4e99-8b07-fc9eef0bbfce
`load_config_layers_state()` should load config from a
`.codex/config.toml` in any folder between the `cwd` for a thread and
the project root. Though in order to do that,
`load_config_layers_state()` needs to know what the `cwd` is, so this PR
does the work to thread the `cwd` through for existing callsites.
A notable exception is the `/config` endpoint in app server for which a
`cwd` is not guaranteed to be associated with the query, so the `cwd`
param is `Option<AbsolutePathBuf>` to account for this case.
The logic to make use of the `cwd` will be done in a follow-up PR.
This adds support for `allowed_sandbox_modes` in `requirements.toml` and
provides legacy support for constraining sandbox modes in
`managed_config.toml`. This is converted to `Constrained<SandboxPolicy>`
in `ConfigRequirements` and applied to `Config` such that constraints
are enforced throughout the harness.
Note that, because `managed_config.toml` is deprecated, we do not add
support for the new `external-sandbox` variant recently introduced in
https://github.com/openai/codex/pull/8290. As noted, that variant is not
supported in `config.toml` today, but can be configured programmatically
via app server.
https://github.com/openai/codex/pull/8235 introduced `ConfigBuilder` and
this PR updates all call non-test call sites to use it instead of
`Config::load_from_base_config_with_overrides()`.
This is important because `load_from_base_config_with_overrides()` uses
an empty `ConfigRequirements`, which is a reasonable default for testing
so the tests are not influenced by the settings on the host. This method
is now guarded by `#[cfg(test)]` so it cannot be used by business logic.
Because `ConfigBuilder::build()` is `async`, many of the test methods
had to be migrated to be `async`, as well. On the bright side, this made
it possible to eliminate a bunch of `block_on_future()` stuff.
This PR does various types of cleanup before I can proceed with more
ambitious changes to config loading.
First, I noticed duplicated code across these two methods:
774bd9e432/codex-rs/core/src/config/mod.rs (L314-L324)774bd9e432/codex-rs/core/src/config/mod.rs (L334-L344)
This has now been consolidated in
`load_config_as_toml_with_cli_overrides()`.
Further, I noticed that `Config::load_with_cli_overrides()` took two
similar arguments:
774bd9e432/codex-rs/core/src/config/mod.rs (L308-L311)
The difference between `cli_overrides` and `overrides` was not
immediately obvious to me. At first glance, it appears that one should
be able to be expressed in terms of the other, but it turns out that
some fields of `ConfigOverrides` (such as `cwd` and
`codex_linux_sandbox_exe`) are, by design, not configurable via a
`.toml` file or a command-line `--config` flag.
That said, I discovered that many callers of
`Config::load_with_cli_overrides()` were passing
`ConfigOverrides::default()` for `overrides`, so I created two separate
methods:
- `Config::load_with_cli_overrides(cli_overrides: Vec<(String,
TomlValue)>)`
- `Config::load_with_cli_overrides_and_harness_overrides(cli_overrides:
Vec<(String, TomlValue)>, harness_overrides: ConfigOverrides)`
The latter has a long name, as it is _not_ what should be used in the
common case, so the extra typing is designed to draw attention to this
fact. I tried to update the existing callsites to use the shorter name,
where possible.
Further, in the cases where `ConfigOverrides` is used, usually only a
limited subset of fields are actually set, so I updated the declarations
to leverage `..Default::default()` where possible.
This change prototypes support for Skills with the CLI. This is an
**experimental** feature for internal testing.
---------
Co-authored-by: Gav Verma <gverma@openai.com>
By default, show only sessions that shared a cwd with the current cwd.
`--all` shows all sessions in all cwds. Also, show the branch name from
the rollout metadata.
<img width="1091" height="638" alt="Screenshot 2025-11-04 at 3 30 47 PM"
src="https://github.com/user-attachments/assets/aae90308-6115-455f-aff7-22da5f1d9681"
/>
## Overview
Adds LM Studio OSS support. Closes#1883
### Changes
This PR enhances the behavior of `--oss` flag to support LM Studio as a
provider. Additionally, it introduces a new flag`--local-provider` which
can take in `lmstudio` or `ollama` as values if the user wants to
explicitly choose which one to use.
If no provider is specified `codex --oss` will auto-select the provider
based on whichever is running.
#### Additional enhancements
The default can be set using `oss-provider` in config like:
```
oss_provider = "lmstudio"
```
For non-interactive users, they will need to either provide the provider
as an arg or have it in their `config.toml`
### Notes
For best performance, [set the default context
length](https://lmstudio.ai/docs/app/advanced/per-model) for gpt-oss to
the maximum your machine can support
---------
Co-authored-by: Matt Clayton <matt@lmstudio.ai>
Co-authored-by: Eric Traut <etraut@openai.com>
Fixes#4940Fixes#4892
When selecting "No, ask me to approve edits and commands" during
onboarding, the code wasn't applying the correct approval policy,
causing Codex to block all write operations instead of requesting
approval.
This PR fixes the issue by persisting the "DontTrust" decision in
config.toml as `trust_level = "untrusted"` and handling it in the
sandbox and approval policy logic, so Codex correctly asks for approval
before making changes.
## Before (bug)
<img width="709" height="500" alt="bef"
src="https://github.com/user-attachments/assets/5aced26d-d810-4754-879a-89d9e4e0073b"
/>
## After (fixed)
<img width="713" height="359" alt="aft"
src="https://github.com/user-attachments/assets/9887bbcb-a9a5-4e54-8e76-9125a782226b"
/>
---------
Co-authored-by: Eric Traut <etraut@openai.com>
- Introducing a screen to inform users of model changes.
- Config name is being passed to be able to reuse this component in the
future for future models
I recently fixed a bug in [this
PR](https://github.com/openai/codex/pull/6285) that prevented Ctrl+C
from dismissing the login menu in the TUI and leaving the user unauthed.
A [user pointed out](https://github.com/openai/codex/issues/6418) that
this makes Ctrl+C can no longer be used to exit the app. This PR changes
the behavior so we exit the app rather than ignoring the Ctrl+C.
