## Summary
This adds `experimental_network.danger_full_access_denylist_only` for
orgs that want yolo / danger-full-access sessions to keep full network
access while still enforcing centrally managed deny rules.
When the flag is true and the session sandbox is `danger-full-access`,
the network proxy starts with:
- domain allowlist set to `*`
- managed domain `deny` entries enforced
- upstream proxy use allowed
- all Unix sockets allowed
- local/private binding allowed
Caveat: the denylist is best effort only. In yolo / danger-full-access
mode, Codex or the model can use an allowed socket or other
local/private network path to bypass the proxy denylist, so this should
not be treated as a hard security boundary.
The flag is intentionally scoped to `SandboxPolicy::DangerFullAccess`.
Read-only and workspace-write modes keep the existing managed/user
allowlist, denylist, Unix socket, and local-binding behavior. This does
not enable the non-loopback proxy listener setting; that still requires
its own explicit config.
This also threads the new field through config requirements parsing,
app-server protocol/schema output, config API mapping, and the TUI debug
config output.
## How to use
Add the flag under `[experimental_network]` in the network policy config
that is delivered to Codex. The setting is not under `[permissions]`.
```toml
[experimental_network]
enabled = true
danger_full_access_denylist_only = true
[experimental_network.domains]
"blocked.example.com" = "deny"
"*.blocked.example.com" = "deny"
```
With that configuration, yolo / danger-full-access sessions get broad
network access except for the managed denied domains above. The denylist
remains a best-effort proxy policy because the session may still use
allowed sockets to bypass it. Other sandbox modes do not get the
wildcard domain allowlist or the socket/local-binding relaxations from
this flag.
## Verification
- `cargo test -p codex-config network_requirements`
- `cargo test -p codex-core network_proxy_spec`
- `cargo test -p codex-app-server map_requirements_toml_to_api`
- `cargo test -p codex-tui debug_config_output`
- `cargo test -p codex-app-server-protocol`
- `just write-app-server-schema`
- `just fmt`
- `just fix -p codex-config -p codex-core -p codex-app-server-protocol
-p codex-app-server -p codex-tui`
- `just fix -p codex-core -p codex-config`
- `git diff --check`
- `cargo clean`
## Description
Add requirements.toml support for `allowed_approvals_reviewers =
["user", "guardian_subagent"]`, so admins can now restrict the use of
guardian mode.
Note: If a user sets a reviewer that isn’t allowed by requirements.toml,
config loading falls back to the first allowed reviewer and emits a
startup warning.
The table below describes the possible admin controls.
| Admin intent | `requirements.toml` | User `config.toml` | End result |
|---|---|---|---|
| Leave Guardian optional | omit `allowed_approvals_reviewers` or set
`["user", "guardian_subagent"]` | user chooses `approvals_reviewer =
"user"` or `"guardian_subagent"` | Guardian off for `user`, on for
`guardian_subagent` + `approval_policy = "on-request"` |
| Force Guardian off | `allowed_approvals_reviewers = ["user"]` | any
user value | Effective reviewer is `user`; Guardian off |
| Force Guardian on | `allowed_approvals_reviewers =
["guardian_subagent"]` and usually `allowed_approval_policies =
["on-request"]` | any user reviewer value; user should also have
`approval_policy = "on-request"` unless policy is forced | Effective
reviewer is `guardian_subagent`; Guardian on when effective approval
policy is `on-request` |
| Allow both, but default to manual if user does nothing |
`allowed_approvals_reviewers = ["user", "guardian_subagent"]` | omit
`approvals_reviewer` | Effective reviewer is `user`; Guardian off |
| Allow both, and user explicitly opts into Guardian |
`allowed_approvals_reviewers = ["user", "guardian_subagent"]` |
`approvals_reviewer = "guardian_subagent"` and `approval_policy =
"on-request"` | Guardian on |
| Invalid admin config | `allowed_approvals_reviewers = []` | anything |
Config load error |
## Summary
This PR replaces the legacy network allow/deny list model with explicit
rule maps for domains and unix sockets across managed requirements,
permissions profiles, the network proxy config, and the app server
protocol.
Concretely, it:
- introduces typed domain (`allow` / `deny`) and unix socket permission
(`allow` / `none`) entries instead of separate `allowed_domains`,
`denied_domains`, and `allow_unix_sockets` lists
- updates config loading, managed requirements merging, and exec-policy
overlays to read and upsert rule entries consistently
- exposes the new shape through protocol/schema outputs, debug surfaces,
and app-server config APIs
- rejects the legacy list-based keys and updates docs/tests to reflect
the new config format
## Why
The previous representation split related network policy across multiple
parallel lists, which made merging and overriding rules harder to reason
about. Moving to explicit keyed permission maps gives us a single source
of truth per host/socket entry, makes allow/deny precedence clearer, and
gives protocol consumers access to the full rule state instead of
derived projections only.
## Backward Compatibility
### Backward compatible
- Managed requirements still accept the legacy
`experimental_network.allowed_domains`,
`experimental_network.denied_domains`, and
`experimental_network.allow_unix_sockets` fields. They are normalized
into the new canonical `domains` and `unix_sockets` maps internally.
- App-server v2 still deserializes legacy `allowedDomains`,
`deniedDomains`, and `allowUnixSockets` payloads, so older clients can
continue reading managed network requirements.
- App-server v2 responses still populate `allowedDomains`,
`deniedDomains`, and `allowUnixSockets` as legacy compatibility views
derived from the canonical maps.
- `managed_allowed_domains_only` keeps the same behavior after
normalization. Legacy managed allowlists still participate in the same
enforcement path as canonical `domains` entries.
### Not backward compatible
- Permissions profiles under `[permissions.<profile>.network]` no longer
accept the legacy list-based keys. Those configs must use the canonical
`[domains]` and `[unix_sockets]` tables instead of `allowed_domains`,
`denied_domains`, or `allow_unix_sockets`.
- Managed `experimental_network` config cannot mix canonical and legacy
forms in the same block. For example, `domains` cannot be combined with
`allowed_domains` or `denied_domains`, and `unix_sockets` cannot be
combined with `allow_unix_sockets`.
- The canonical format can express explicit `"none"` entries for unix
sockets, but those entries do not round-trip through the legacy
compatibility fields because the legacy fields only represent allow/deny
lists.
## Testing
`/target/debug/codex sandbox macos --log-denials /bin/zsh -c 'curl
https://www.example.com' ` gives 200 with config
```
[permissions.workspace.network.domains]
"www.example.com" = "allow"
```
and fails when set to deny: `curl: (56) CONNECT tunnel failed, response
403`.
Also tested backward compatibility path by verifying that adding the
following to `/etc/codex/requirements.toml` works:
```
[experimental_network]
allowed_domains = ["www.example.com"]
```
## Summary
- add `skill_approval` to `RejectConfig` and the app-server v2
`AskForApproval::Reject` payload so skill-script prompts can be
configured independently from sandbox and rule-based prompts
- update Unix shell escalation to reject prompts based on the actual
decision source, keeping prefix rules tied to `rules`, unmatched command
fallbacks tied to `sandbox_approval`, and skill scripts tied to
`skill_approval`
- regenerate the affected protocol/config schemas and expand
unit/integration coverage for the new flag and skill approval behavior
## Summary
We need to support allowing request_permissions calls when using
`Reject` policy
<img width="1133" height="588" alt="Screenshot 2026-03-09 at 12 06
40 PM"
src="https://github.com/user-attachments/assets/a8df987f-c225-4866-b8ab-5590960daec5"
/>
Note that this is a backwards-incompatible change for Reject policy. I'm
not sure if we need to add a default based on our current use/setup
## Testing
- [x] Added tests
- [x] Tested locally
## Summary
- delete the network proxy admin server and its runtime listener/task
plumbing
- remove the admin endpoint config, runtime, requirement, protocol,
schema, and debug-surface fields
- update proxy docs to reflect the remaining HTTP and SOCKS listeners
only
## Why
Enterprises can already constrain approvals, sandboxing, and web search
through `requirements.toml` and MDM, but feature flags were still only
configurable as managed defaults. That meant an enterprise could suggest
feature values, but it could not actually pin them.
This change closes that gap and makes enterprise feature requirements
behave like the other constrained settings. The effective feature set
now stays consistent with enterprise requirements during config load,
when config writes are validated, and when runtime code mutates feature
flags later in the session.
It also tightens the runtime API for managed features. `ManagedFeatures`
now follows the same constraint-oriented shape as `Constrained<T>`
instead of exposing panic-prone mutation helpers, and production code
can no longer construct it through an unconstrained `From<Features>`
path.
The PR also hardens the `compact_resume_fork` integration coverage on
Windows. After the feature-management changes,
`compact_resume_after_second_compaction_preserves_history` was
overflowing the libtest/Tokio thread stacks on Windows, so the test now
uses an explicit larger-stack harness as a pragmatic mitigation. That
may not be the ideal root-cause fix, and it merits a parallel
investigation into whether part of the async future chain should be
boxed to reduce stack pressure instead.
## What Changed
Enterprises can now pin feature values in `requirements.toml` with the
requirements-side `features` table:
```toml
[features]
personality = true
unified_exec = false
```
Only canonical feature keys are allowed in the requirements `features`
table; omitted keys remain unconstrained.
- Added a requirements-side pinned feature map to
`ConfigRequirementsToml`, threaded it through source-preserving
requirements merge and normalization in `codex-config`, and made the
TOML surface use `[features]` (while still accepting legacy
`[feature_requirements]` for compatibility).
- Exposed `featureRequirements` from `configRequirements/read`,
regenerated the JSON/TypeScript schema artifacts, and updated the
app-server README.
- Wrapped the effective feature set in `ManagedFeatures`, backed by
`ConstrainedWithSource<Features>`, and changed its API to mirror
`Constrained<T>`: `can_set(...)`, `set(...) -> ConstraintResult<()>`,
and result-returning `enable` / `disable` / `set_enabled` helpers.
- Removed the legacy-usage and bulk-map passthroughs from
`ManagedFeatures`; callers that need those behaviors now mutate a plain
`Features` value and reapply it through `set(...)`, so the constrained
wrapper remains the enforcement boundary.
- Removed the production loophole for constructing unconstrained
`ManagedFeatures`. Non-test code now creates it through the configured
feature-loading path, and `impl From<Features> for ManagedFeatures` is
restricted to `#[cfg(test)]`.
- Rejected legacy feature aliases in enterprise feature requirements,
and return a load error when a pinned combination cannot survive
dependency normalization.
- Validated config writes against enterprise feature requirements before
persisting changes, including explicit conflicting writes and
profile-specific feature states that normalize into invalid
combinations.
- Updated runtime and TUI feature-toggle paths to use the constrained
setter API and to persist or apply the effective post-constraint value
rather than the requested value.
- Updated the `core_test_support` Bazel target to include the bundled
core model-catalog fixtures in its runtime data, so helper code that
resolves `core/models.json` through runfiles works in remote Bazel test
environments.
- Renamed the core config test coverage to emphasize that effective
feature values are normalized at runtime, while conflicting persisted
config writes are rejected.
- Ran `compact_resume_after_second_compaction_preserves_history` inside
an explicit 8 MiB test thread and Tokio runtime worker stack, following
the existing larger-stack integration-test pattern, to keep the Windows
`compact_resume_fork` test slice from aborting while a parallel
investigation continues into whether some of the underlying async
futures should be boxed.
## Verification
- `cargo test -p codex-config`
- `cargo test -p codex-core feature_requirements_ -- --nocapture`
- `cargo test -p codex-core
load_requirements_toml_produces_expected_constraints -- --nocapture`
- `cargo test -p codex-core
compact_resume_after_second_compaction_preserves_history -- --nocapture`
- `cargo test -p codex-core compact_resume_fork -- --nocapture`
- Re-ran the built `codex-core` `tests/all` binary with
`RUST_MIN_STACK=262144` for
`compact_resume_after_second_compaction_preserves_history` to confirm
the explicit-stack harness fixes the deterministic low-stack repro.
- `cargo test -p codex-core`
- This still fails locally in unrelated integration areas that expect
the `codex` / `test_stdio_server` binaries or hit existing `search_tool`
wiremock mismatches.
## Docs
`developers.openai.com/codex` should document the requirements-side
`[features]` table for enterprise and MDM-managed configuration,
including that it only accepts canonical feature keys and that
conflicting config writes are rejected.
## Summary
Adds support for a Unix socket escape hatch so we can bypass socket
allowlisting when explicitly enabled.
## Description
* added a new flag, `network.dangerously_allow_all_unix_sockets` as an
explicit escape hatch
* In codex-network-proxy, enabling that flag now allows any absolute
Unix socket path from x-unix-socket instead of requiring each path to be
explicitly allowlisted. Relative paths are still rejected.
* updated the macOS seatbelt path in core so it enforces the same Unix
socket behavior:
* allowlisted sockets generate explicit network* subpath rules
* allow-all generates a broad network* (subpath "/") rule
---------
Co-authored-by: Codex <199175422+chatgpt-codex-connector[bot]@users.noreply.github.com>
This PR makes it possible to disable live web search via an enterprise
config even if the user is running in `--yolo` mode (though cached web
search will still be available). To do this, create
`/etc/codex/requirements.toml` as follows:
```toml
# "live" is not allowed; "disabled" is allowed even though not listed explicitly.
allowed_web_search_modes = ["cached"]
```
Or set `requirements_toml_base64` MDM as explained on
https://developers.openai.com/codex/security/#locations.
### Why
- Enforce admin/MDM/`requirements.toml` constraints on web-search
behavior, independent of user config and per-turn sandbox defaults.
- Ensure per-turn config resolution and review-mode overrides never
crash when constraints are present.
### What
- Add `allowed_web_search_modes` to requirements parsing and surface it
in app-server v2 `ConfigRequirements` (`allowedWebSearchModes`), with
fixtures updated.
- Define a requirements allowlist type (`WebSearchModeRequirement`) and
normalize semantics:
- `disabled` is always implicitly allowed (even if not listed).
- An empty list is treated as `["disabled"]`.
- Make `Config.web_search_mode` a `Constrained<WebSearchMode>` and apply
requirements via `ConstrainedWithSource<WebSearchMode>`.
- Update per-turn resolution (`resolve_web_search_mode_for_turn`) to:
- Prefer `Live → Cached → Disabled` when
`SandboxPolicy::DangerFullAccess` is active (subject to requirements),
unless the user preference is explicitly `Disabled`.
- Otherwise, honor the user’s preferred mode, falling back to an allowed
mode when necessary.
- Update TUI `/debug-config` and app-server mapping to display
normalized `allowed_web_search_modes` (including implicit `disabled`).
- Fix web-search integration tests to assert cached behavior under
`SandboxPolicy::ReadOnly` (since `DangerFullAccess` legitimately prefers
`live` when allowed).
Similar to what @sayan-oai did in openai/codex#8956 for
`config.schema.json`, this PR updates the repo so that it includes the
output of `codex app-server generate-json-schema` and `codex app-server
generate-ts` and adds a test to verify it is in sync with the current
code.
Motivation:
- This makes any schema changes introduced by a PR transparent during
code review.
- In particular, this should help us catch PRs that would introduce a
non-backwards-compatible change to the app schema (eventually, this
should also be enforced by tooling).
- Once https://github.com/openai/codex/pull/10231 is in to formalize the
notion of "experimental" fields, we can work on ensuring the
non-experimental bits are backwards-compatible.
`codex-rs/app-server-protocol/tests/schema_fixtures.rs` was added as the
test and `just write-app-server-schema` can be use to generate the
vendored schema files.
Incidentally, when I run:
```
rg _ codex-rs/app-server-protocol/schema/typescript/v2
```
I see a number of `snake_case` names that should be `camelCase`.
