### What
Add `WebSearchMode` enum (disabled, cached live, defaults to cached) to
config + V2 protocol. This enum takes precedence over legacy flags:
`web_search_cached`, `web_search_request`, and `tools.web_search`.
Keep `--search` as live.
### Tests
Added tests
A simple `s/mcp_server_requirements/mcp_servers/g` for an unreleased
feature. @bolinfest correctly pointed out, it's already in
`requirements.toml` so the `_requirements` is redundant.
Instead of having a hard-coded default review model, use the current
model for running `/review` unless one is specified in the config.
Also inherit current reasoning effort
When an invalid config.toml key or value is detected, the CLI currently
just quits. This leaves the VSCE in a dead state.
This PR changes the behavior to not quit and bubble up the config error
to users to make it actionable. It also surfaces errors related to
"rules" parsing.
This allows us to surface these errors to users in the VSCE, like this:
<img width="342" height="129" alt="Screenshot 2026-01-13 at 4 29 22 PM"
src="https://github.com/user-attachments/assets/a79ffbe7-7604-400c-a304-c5165b6eebc4"
/>
<img width="346" height="244" alt="Screenshot 2026-01-13 at 4 45 06 PM"
src="https://github.com/user-attachments/assets/de874f7c-16a2-4a95-8c6d-15f10482e67b"
/>
Enterprises want to restrict the MCP servers their users can use.
Admins can now specify an allowlist of MCPs in `requirements.toml`. The
MCP servers are matched on both Name and Transport (local path or HTTP
URL) -- both must match to allow the MCP server. This prevents
circumventing the allowlist by renaming MCP servers in user config. (It
is still possible to replace the local path e.g. rewrite say
`/usr/local/github-mcp` with a nefarious MCP. We could allow hash
pinning in the future, but that would break updates. I also think this
represents a broader, out-of-scope problem.)
We introduce a new field to Constrained: "normalizer". In general, it is
a fn(T) -> T and applies when `Constrained<T>.set()` is called. In this
particular case, it disables MCP servers which do not match the
allowlist. An alternative solution would remove this and instead throw a
ConstraintError. That would stop Codex launching if any MCP server was
configured which didn't match. I think this is bad.
We currently reuse the enabled flag on MCP servers to disable them, but
don't propagate any information about why they are disabled. I'd like to
add that in a follow up PR, possibly by switching out enabled with an
enum.
In action:
```
# MCP server config has two MCPs. We are going to allowlist one of them.
➜ codex git:(gt/restrict-mcps) ✗ cat ~/.codex/config.toml | grep mcp_servers -A1
[mcp_servers.hello_world]
command = "hello-world-mcp"
--
[mcp_servers.docs]
command = "docs-mcp"
# Restrict the MCPs to the hello_world MCP.
➜ codex git:(gt/restrict-mcps) ✗ defaults read com.openai.codex requirements_toml_base64 | base64 -d
[mcp_server_allowlist.hello_world]
command = "hello-world-mcp"
# List the MCPs, observe hello_world is enabled and docs is disabled.
➜ codex git:(gt/restrict-mcps) ✗ just codex mcp list
cargo run --bin codex -- "$@"
Finished `dev` profile [unoptimized + debuginfo] target(s) in 0.25s
Running `target/debug/codex mcp list`
Name Command Args Env Cwd Status Auth
docs docs-mcp - - - disabled Unsupported
hello_world hello-world-mcp - - - enabled Unsupported
# Remove the restrictions.
➜ codex git:(gt/restrict-mcps) ✗ defaults delete com.openai.codex requirements_toml_base64
# Observe both MCPs are enabled.
➜ codex git:(gt/restrict-mcps) ✗ just codex mcp list
cargo run --bin codex -- "$@"
Finished `dev` profile [unoptimized + debuginfo] target(s) in 0.25s
Running `target/debug/codex mcp list`
Name Command Args Env Cwd Status Auth
docs docs-mcp - - - enabled Unsupported
hello_world hello-world-mcp - - - enabled Unsupported
# A new requirements that updates the command to one that does not match.
➜ codex git:(gt/restrict-mcps) ✗ cat ~/requirements.toml
[mcp_server_allowlist.hello_world]
command = "hello-world-mcp-v2"
# Use those requirements.
➜ codex git:(gt/restrict-mcps) ✗ defaults write com.openai.codex requirements_toml_base64 "$(base64 -i /Users/gt/requirements.toml)"
# Observe both MCPs are disabled.
➜ codex git:(gt/restrict-mcps) ✗ just codex mcp list
cargo run --bin codex -- "$@"
Finished `dev` profile [unoptimized + debuginfo] target(s) in 0.75s
Running `target/debug/codex mcp list`
Name Command Args Env Cwd Status Auth
docs docs-mcp - - - disabled Unsupported
hello_world hello-world-mcp - - - disabled Unsupported
```
### What
Add JSON Schema generation for `config.toml`, with checked‑in
`docs/config.schema.json`. We can move the schema elsewhere if preferred
(and host it if there's demand).
Add fixture test to prevent drift and `just write-config-schema` to
regenerate on schema changes.
Generate MCP config schema from `RawMcpServerConfig` instead of
`McpServerConfig` because that is the runtime type used for
deserialization.
Populate feature flag values into generated schema so they can be
autocompleted.
### Tests
Added tests + regenerate script to prevent drift. Tested autocompletions
using generated jsonschema locally with Even Better TOML.
https://github.com/user-attachments/assets/5aa7cd39-520c-4a63-96fb-63798183d0bc
This is an alternate PR to solving the same problem as
<https://github.com/openai/codex/pull/8227>.
In this PR, when Ollama is used via `--oss` (or via `model_provider =
"ollama"`), we default it to use the Responses format. At runtime, we do
an Ollama version check, and if the version is older than when Responses
support was added to Ollama, we print out a warning.
Because there's no way of configuring the wire api for a built-in
provider, we temporarily add a new `oss_provider`/`model_provider`
called `"ollama-chat"` that will force the chat format.
Once the `"chat"` format is fully removed (see
<https://github.com/openai/codex/discussions/7782>), `ollama-chat` can
be removed as well
---------
Co-authored-by: Eric Traut <etraut@openai.com>
Co-authored-by: Michael Bolin <mbolin@openai.com>
Currently the callback URI for MCP authentication is dynamically
generated. More specifically, the callback URI is dynamic because the
port part of it is randomly chosen by the OS. This is not ideal as
callback URIs are recommended to be static and many authorization
servers do not support dynamic callback URIs.
This PR fixes that issue by exposing a new config option named
`mcp_oauth_callback_port`. When it is set, the callback URI is
constructed using this port rather than a random one chosen by the OS,
thereby making callback URI static.
Related issue: https://github.com/openai/codex/issues/8827
Fixes#2558
Codex uses alternate screen mode (CSI 1049) which, per xterm spec,
doesn't support scrollback. Zellij follows this strictly, so users can't
scroll back through output.
**Changes:**
- Add `tui.alternate_screen` config: `auto` (default), `always`, `never`
- Add `--no-alt-screen` CLI flag
- Auto-detect Zellij and skip alt screen (uses existing `ZELLIJ` env var
detection)
**Usage:**
```bash
# CLI flag
codex --no-alt-screen
# Or in config.toml
[tui]
alternate_screen = "never"
```
With default `auto` mode, Zellij users get working scrollback without
any config changes.
---------
Co-authored-by: Josh McKinney <joshka@openai.com>
Some enterprises do not want their users to be able to `/feedback`.
<img width="395" height="325" alt="image"
src="https://github.com/user-attachments/assets/2dae9c0b-20c3-4a15-bcd3-0187857ebbd8"
/>
Adds to `config.toml`:
```toml
[feedback]
enabled = false
```
I've deliberately decided to:
1. leave other references to `/feedback` (e.g. in the interrupt message,
tips of the day) unchanged. I think we should continue to promote the
feature even if it is not usable currently.
2. leave the `/feedback` menu item selectable and display an error
saying it's disabled, rather than remove the menu item (which I believe
would raise more questions).
but happy to discuss these.
This will be followed by a change to requirements.toml that admins can
use to force the value of feedback.enabled.
Elevated Sandbox NUX:
* prompt for elevated sandbox setup when agent mode is selected (via
/approvals or at startup)
* prompt for degraded sandbox if elevated setup is declined or fails
* introduce /elevate-sandbox command to upgrade from degraded
experience.
Add metrics capabilities to Codex. The `README.md` is up to date.
This will not be merged with the metrics before this PR of course:
https://github.com/openai/codex/pull/8350
We used to override truncation policy by comparing model info vs config
value in context manager. A better way to do it is to construct model
info using the config value
- Merge ModelFamily into ModelInfo
- Remove logic for adding instructions to apply patch
- Add compaction limit and visible context window to `ModelInfo`
Load managed requirements from MDM key `requirements_toml_base64`.
Tested on my Mac (using `defaults` to set the preference, though this
would be set by MDM in production):
```
➜ codex git:(gt/mdm-requirements) defaults read com.openai.codex requirements_toml_base64 | base64 -d
allowed_approval_policies = ["on-request"]
➜ codex git:(gt/mdm-requirements) just c --yolo
cargo run --bin codex -- "$@"
Finished `dev` profile [unoptimized + debuginfo] target(s) in 0.26s
Running `target/debug/codex --yolo`
Error loading configuration: value `Never` is not in the allowed set [OnRequest]
error: Recipe `codex` failed on line 11 with exit code 1
➜ codex git:(gt/mdm-requirements) defaults delete com.openai.codex requirements_toml_base64
➜ codex git:(gt/mdm-requirements) just c --yolo
cargo run --bin codex -- "$@"
Finished `dev` profile [unoptimized + debuginfo] target(s) in 0.24s
Running `target/debug/codex --yolo`
╭──────────────────────────────────────────────────────────╮
│ >_ OpenAI Codex (v0.0.0) │
│ │
│ model: codex-auto-balanced medium /model to change │
│ directory: ~/code/codex/codex-rs │
╰──────────────────────────────────────────────────────────╯
Tip: Start a fresh idea with /new; the previous session stays in history.
```
This isn't very useful parameter.
logic:
```
if model puts `**` in their reasoning, trim it and visualize the header.
if couldn't trim: don't render
if model doesn't support: don't render
```
We can simplify to:
```
if could trim, visualize header.
if not, don't render
```
- allow configuring `project_root_markers` in `config.toml`
(user/system/MDM) to control project discovery beyond `.git`
- honor the markers after merging pre-project layers; default to
`[".git"]` when unset and skip ancestor walk when set to an empty array
- document the option and add coverage for alternate markers in config
loader tests
- We now support `.codex/config.toml` in repo (from `cwd` up to the
first `.git` found, if any) as layers in `ConfigLayerStack`. A new
`ConfigLayerSource::Project` variant was added to support this.
- In doing this work, I realized that we were resolving relative paths
in `config.toml` after merging everything into one `toml::Value`, which
is wrong: paths should be relativized with respect to the folder
containing the `config.toml` that was deserialized. This PR introduces a
deserialize/re-serialize strategy to account for this in
`resolve_config_paths()`. (This is why `Serialize` is added to so many
types as part of this PR.)
- Added tests to verify this new behavior.
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/openai/codex/pull/8354).
* #8359
* __->__ #8354
### Summary
With codesigning on Mac, Windows and Linux, we should be able to safely
remove `features.rmcp_client` and `use_experimental_use_rmcp_client`
check from the codebase now.
## TUI2: Normalize Mouse Scroll Input Across Terminals (Wheel +
Trackpad)
This changes TUI2 scrolling to a stream-based model that normalizes
terminal scroll event density into consistent wheel behavior (default:
~3 transcript lines per physical wheel notch) while keeping trackpad
input higher fidelity via fractional accumulation.
Primary code: `codex-rs/tui2/src/tui/scrolling/mouse.rs`
Doc of record (model + probe-derived data):
`codex-rs/tui2/docs/scroll_input_model.md`
### Why
Terminals encode both mouse wheels and trackpads as discrete scroll
up/down events with direction but no magnitude, and they vary widely in
how many raw events they emit per physical wheel notch (commonly 1, 3,
or 9+). Timing alone doesn’t reliably distinguish wheel vs trackpad, so
cadence-based heuristics are unstable across terminals/hardware.
This PR treats scroll input as short *streams* separated by silence or
direction flips, normalizes raw event density into tick-equivalents,
coalesces redraws for dense streams, and exposes explicit config
overrides.
### What Changed
#### Scroll Model (TUI2)
- Stream detection
- Start a stream on the first scroll event.
- End a stream on an idle gap (`STREAM_GAP_MS`) or a direction flip.
- Normalization
- Convert raw events into tick-equivalents using per-terminal
`tui.scroll_events_per_tick`.
- Wheel-like vs trackpad-like behavior
- Wheel-like: fixed “classic” lines per wheel notch; flush immediately
for responsiveness.
- Trackpad-like: fractional accumulation + carry across stream
boundaries; coalesce flushes to ~60Hz to avoid floods and reduce “stop
lag / overshoot”.
- Trackpad divisor is intentionally capped: `min(scroll_events_per_tick,
3)` so terminals with dense wheel ticks (e.g. 9 events per notch) don’t
make trackpads feel artificially slow.
- Auto mode (default)
- Start conservatively as trackpad-like (avoid overshoot).
- Promote to wheel-like if the first tick-worth of events arrives
quickly.
- Fallback for 1-event-per-tick terminals (no tick-completion timing
signal).
#### Trackpad Acceleration
Some terminals produce relatively low vertical event density for
trackpad gestures, which makes large/faster swipes feel sluggish even
when small motions feel correct. To address that, trackpad-like streams
apply a bounded multiplier based on event count:
- `multiplier = clamp(1 + abs(events) / scroll_trackpad_accel_events,
1..scroll_trackpad_accel_max)`
The multiplier is applied to the trackpad stream’s computed line delta
(including carried fractional remainder). Defaults are conservative and
bounded.
#### Config Knobs (TUI2)
All keys live under `[tui]`:
- `scroll_wheel_lines`: lines per physical wheel notch (default: 3).
- `scroll_events_per_tick`: raw vertical scroll events per physical
wheel notch (terminal-specific default; fallback: 3).
- Wheel-like per-event contribution: `scroll_wheel_lines /
scroll_events_per_tick`.
- `scroll_trackpad_lines`: baseline trackpad sensitivity (default: 1).
- Trackpad-like per-event contribution: `scroll_trackpad_lines /
min(scroll_events_per_tick, 3)`.
- `scroll_trackpad_accel_events` / `scroll_trackpad_accel_max`: bounded
trackpad acceleration (defaults: 30 / 3).
- `scroll_mode = auto|wheel|trackpad`: force behavior or use the
heuristic (default: `auto`).
- `scroll_wheel_tick_detect_max_ms`: auto-mode promotion threshold (ms).
- `scroll_wheel_like_max_duration_ms`: auto-mode fallback for
1-event-per-tick terminals (ms).
- `scroll_invert`: invert scroll direction (applies to wheel +
trackpad).
Config docs: `docs/config.md` and field docs in
`codex-rs/core/src/config/types.rs`.
#### App Integration
- The app schedules follow-up ticks to close idle streams (via
`ScrollUpdate::next_tick_in` and `schedule_frame_in`) and finalizes
streams on draw ticks.
- `codex-rs/tui2/src/app.rs`
#### Docs
- Single doc of record describing the model + preserved probe
findings/spec:
- `codex-rs/tui2/docs/scroll_input_model.md`
#### Other (jj-only friendliness)
- `codex-rs/tui2/src/diff_render.rs`: prefer stable cwd-relative paths
when the file is under the cwd even if there’s no `.git`.
### Terminal Defaults
Per-terminal defaults are derived from scroll-probe logs (see doc).
Notable:
- Ghostty currently defaults to `scroll_events_per_tick = 3` even though
logs measured ~9 in one setup. This is a deliberate stopgap; if your
Ghostty build emits ~9 events per wheel notch, set:
```toml
[tui]
scroll_events_per_tick = 9
```
### Testing
- `just fmt`
- `just fix -p codex-core --allow-no-vcs`
- `cargo test -p codex-core --lib` (pass)
- `cargo test -p codex-tui2` (scroll tests pass; remaining failures are
known flaky VT100 color tests in `insert_history`)
### Review Focus
- Stream finalization + frame scheduling in `codex-rs/tui2/src/app.rs`.
- Auto-mode promotion thresholds and the 1-event-per-tick fallback
behavior.
- Trackpad divisor cap (`min(events_per_tick, 3)`) and acceleration
defaults.
- Ghostty default tradeoff (3 vs ~9) and whether we should change it.
`load_config_layers_state()` should load config from a
`.codex/config.toml` in any folder between the `cwd` for a thread and
the project root. Though in order to do that,
`load_config_layers_state()` needs to know what the `cwd` is, so this PR
does the work to thread the `cwd` through for existing callsites.
A notable exception is the `/config` endpoint in app server for which a
`cwd` is not guaranteed to be associated with the query, so the `cwd`
param is `Option<AbsolutePathBuf>` to account for this case.
The logic to make use of the `cwd` will be done in a follow-up PR.
This adds support for `allowed_sandbox_modes` in `requirements.toml` and
provides legacy support for constraining sandbox modes in
`managed_config.toml`. This is converted to `Constrained<SandboxPolicy>`
in `ConfigRequirements` and applied to `Config` such that constraints
are enforced throughout the harness.
Note that, because `managed_config.toml` is deprecated, we do not add
support for the new `external-sandbox` variant recently introduced in
https://github.com/openai/codex/pull/8290. As noted, that variant is not
supported in `config.toml` today, but can be configured programmatically
via app server.
https://github.com/openai/codex/pull/8235 introduced `ConfigBuilder` and
this PR updates all call non-test call sites to use it instead of
`Config::load_from_base_config_with_overrides()`.
This is important because `load_from_base_config_with_overrides()` uses
an empty `ConfigRequirements`, which is a reasonable default for testing
so the tests are not influenced by the settings on the host. This method
is now guarded by `#[cfg(test)]` so it cannot be used by business logic.
Because `ConfigBuilder::build()` is `async`, many of the test methods
had to be migrated to be `async`, as well. On the bright side, this made
it possible to eliminate a bunch of `block_on_future()` stuff.
This is a significant change to how layers of configuration are applied.
In particular, the `ConfigLayerStack` now has two important fields:
- `layers: Vec<ConfigLayerEntry>`
- `requirements: ConfigRequirements`
We merge `TomlValue`s across the layers, but they are subject to
`ConfigRequirements` before creating a `Config`.
How I would review this PR:
- start with `codex-rs/app-server-protocol/src/protocol/v2.rs` and note
the new variants added to the `ConfigLayerSource` enum:
`LegacyManagedConfigTomlFromFile` and `LegacyManagedConfigTomlFromMdm`
- note that `ConfigLayerSource` now has a `precedence()` method and
implements `PartialOrd`
- `codex-rs/core/src/config_loader/layer_io.rs` is responsible for
loading "admin" preferences from `/etc/codex/managed_config.toml` and
MDM. Because `/etc/codex/managed_config.toml` is now deprecated in favor
of `/etc/codex/requirements.toml` and `/etc/codex/config.toml`, we now
include some extra information on the `LoadedConfigLayers` returned in
`layer_io.rs`.
- `codex-rs/core/src/config_loader/mod.rs` has major changes to
`load_config_layers_state()`, which is what produces `ConfigLayerStack`.
The docstring has the new specification and describes the various layers
that will be loaded and the precedence order.
- It uses the information from `LoaderOverrides` "twice," both in the
spirit of legacy support:
- We use one instances to derive an instance of `ConfigRequirements`.
Currently, the only field in `managed_config.toml` that contributes to
`ConfigRequirements` is `approval_policy`. This PR introduces
`Constrained::allow_only()` to support this.
- We use a clone of `LoaderOverrides` to derive
`ConfigLayerSource::LegacyManagedConfigTomlFromFile` and
`ConfigLayerSource::LegacyManagedConfigTomlFromMdm` layers, as
appropriate. As before, this ends up being a "best effort" at enterprise
controls, but is enforcement is not guaranteed like it is for
`ConfigRequirements`.
- Now we only create a "user" layer if `$CODEX_HOME/config.toml` exists.
(Previously, a user layer was always created for `ConfigLayerStack`.)
- Similarly, we only add a "session flags" layer if there are CLI
overrides.
- `config_loader/state.rs` contains the updated implementation for
`ConfigLayerStack`. Note the public API is largely the same as before,
but the implementation is quite different. We leverage the fact that
`ConfigLayerSource` is now `PartialOrd` to ensure layers are in the
correct order.
- A `Config` constructed via `ConfigBuilder.build()` will use
`load_config_layers_state()` to create the `ConfigLayerStack` and use
the associated `ConfigRequirements` when constructing the `Config`
object.
- That said, a `Config` constructed via
`Config::load_from_base_config_with_overrides()` does _not_ yet use
`ConfigBuilder`, so it creates a `ConfigRequirements::default()` instead
of loading a proper `ConfigRequirements`. I will fix this in a
subsequent PR.
Then the following files are mostly test changes:
```
codex-rs/app-server/tests/suite/v2/config_rpc.rs
codex-rs/core/src/config/service.rs
codex-rs/core/src/config_loader/tests.rs
```
Again, because we do not always include "user" and "session flags"
layers when the contents are empty, `ConfigLayerStack` sometimes has
fewer layers than before (and the precedence order changed slightly),
which is the main reason integration tests changed.
Introduce `ConfigBuilder` as an alternative to our existing `Config`
constructors.
I noticed that the existing constructors,
`Config::load_with_cli_overrides()` and
`Config::load_with_cli_overrides_and_harness_overrides()`, did not take
`codex_home` as a parameter, which can be a problem.
Historically, when Codex was purely a CLI, we wanted to be extra sure
that the creation of `codex_home` was always done via
`find_codex_home()`, so we did not expose `codex_home` as a parameter
when creating `Config` in business logic. But in integration tests,
`codex_home` nearly always needs to be configured (as a temp directory),
which is why callers would have to go through
`Config::load_from_base_config_with_overrides()` instead.
Now that the Codex harness also functions as an app server, which could
conceivably load multiple threads where `codex_home` is parameterized
differently in each one, I think it makes sense to make this
configurable. Going to a builder pattern makes it more flexible to
ensure an arbitrary permutation of options can be set when constructing
a `Config` while using the appropriate defaults for the options that
aren't set explicitly.
Ultimately, I think this should make it possible for us to make
`Config::load_from_base_config_with_overrides()` private because all
integration tests should be able to leverage `ConfigBuilder` instead.
Though there could be edge cases, so I'll pursue that migration after we
get through the current config overhaul.
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/openai/codex/pull/8235).
* #8237
* __->__ #8235
This PR does various types of cleanup before I can proceed with more
ambitious changes to config loading.
First, I noticed duplicated code across these two methods:
774bd9e432/codex-rs/core/src/config/mod.rs (L314-L324)774bd9e432/codex-rs/core/src/config/mod.rs (L334-L344)
This has now been consolidated in
`load_config_as_toml_with_cli_overrides()`.
Further, I noticed that `Config::load_with_cli_overrides()` took two
similar arguments:
774bd9e432/codex-rs/core/src/config/mod.rs (L308-L311)
The difference between `cli_overrides` and `overrides` was not
immediately obvious to me. At first glance, it appears that one should
be able to be expressed in terms of the other, but it turns out that
some fields of `ConfigOverrides` (such as `cwd` and
`codex_linux_sandbox_exe`) are, by design, not configurable via a
`.toml` file or a command-line `--config` flag.
That said, I discovered that many callers of
`Config::load_with_cli_overrides()` were passing
`ConfigOverrides::default()` for `overrides`, so I created two separate
methods:
- `Config::load_with_cli_overrides(cli_overrides: Vec<(String,
TomlValue)>)`
- `Config::load_with_cli_overrides_and_harness_overrides(cli_overrides:
Vec<(String, TomlValue)>, harness_overrides: ConfigOverrides)`
The latter has a long name, as it is _not_ what should be used in the
common case, so the extra typing is designed to draw attention to this
fact. I tried to update the existing callsites to use the shorter name,
where possible.
Further, in the cases where `ConfigOverrides` is used, usually only a
limited subset of fields are actually set, so I updated the declarations
to leverage `..Default::default()` where possible.
We should not have any `PathBuf` fields in `ConfigToml` or any of the
transitive structs we include, as we should use `AbsolutePathBuf`
instead so that we do not have to keep track of the file from which
`ConfigToml` was loaded such that we need it to resolve relative paths
later when the values of `ConfigToml` are used.
I only found two instances of this: `experimental_instructions_file` and
`experimental_compact_prompt_file`. Incidentally, when these were
specified as relative paths, they were resolved against `cwd` rather
than `config.toml`'s parent, which seems wrong to me. I changed the
behavior so they are resolved against the parent folder of the
`config.toml` being parsed, which we get "for free" due to the
introduction of `AbsolutePathBufGuard ` in
https://github.com/openai/codex/pull/7796.
While it is not great to change the behavior of a released feature,
these fields are prefixed with `experimental_`, which I interpret to
mean we have the liberty to change the contract.
For reference:
- `experimental_instructions_file` was introduced in
https://github.com/openai/codex/pull/1803
- `experimental_compact_prompt_file` was introduced in
https://github.com/openai/codex/pull/5959
Constrain `approval_policy` through new `admin_policy` config.
This PR will:
1. Add a `admin_policy` section to config, with a single field (for now)
`allowed_approval_policies`. This list constrains the set of
user-settable `approval_policy`s.
2. Introduce a new `Constrained<T>` type, which combines a current value
and a validator function. The validator function ensures disallowed
values are not set.
3. Change the type of `approval_policy` on `Config` and
`SessionConfiguration` from `AskForApproval` to
`Constrained<AskForApproval>`. The validator function is set by the
values passed into `allowed_approval_policies`.
4. `GenericDisplayRow`: add a `disabled_reason: Option<String>`. When
set, it disables selection of the value and indicates as such in the
menu. This also makes it unselectable with arrow keys or numbers. This
is used in the `/approvals` menu.
Follow ups are:
1. Do the same thing to `sandbox_policy`.
2. Propagate the allowed set of values through app-server for the
extension (though already this should prevent app-server from setting
this values, it's just that we want to disable UI elements that are
unsettable).
Happy to split this PR up if you prefer, into the logical numbered areas
above. Especially if there are parts we want to gavel on separately
(e.g. admin_policy).
Disabled full access:
<img width="1680" height="380" alt="image"
src="https://github.com/user-attachments/assets/1fb61c8c-1fcb-4dc4-8355-2293edb52ba0"
/>
Disabled `--yolo` on startup:
<img width="749" height="76" alt="image"
src="https://github.com/user-attachments/assets/0a1211a0-6eb1-40d6-a1d7-439c41e94ddb"
/>
CODEX-4087
Changes the `writable_roots` field of the `WorkspaceWrite` variant of
the `SandboxPolicy` enum from `Vec<PathBuf>` to `Vec<AbsolutePathBuf>`.
This is helpful because now callers can be sure the value is an absolute
path rather than a relative one. (Though when using an absolute path in
a Seatbelt config policy, we still have to _canonicalize_ it first.)
Because `writable_roots` can be read from a config file, it is important
that we are able to resolve relative paths properly using the parent
folder of the config file as the base path.
- Make Config.model optional and centralize default-selection logic in
ModelsManager, including a default_model helper (with
codex-auto-balanced when available) so sessions now carry an explicit
chosen model separate from the base config.
- Resolve `model` once in `core` and `tui` from config. Then store the
state of it on other structs.
- Move refreshing models to be before resolving the default model
This PR attempts to solve two problems by introducing a
`AbsolutePathBuf` type with a special deserializer:
- `AbsolutePathBuf` attempts to be a generally useful abstraction, as it
ensures, by constructing, that it represents a value that is an
absolute, normalized path, which is a stronger guarantee than an
arbitrary `PathBuf`.
- Values in `config.toml` that can be either an absolute or relative
path should be resolved against the folder containing the `config.toml`
in the relative path case. This PR makes this easy to support: the main
cost is ensuring `AbsolutePathBufGuard` is used inside
`deserialize_config_toml_with_base()`.
While `AbsolutePathBufGuard` may seem slightly distasteful because it
relies on thread-local storage, this seems much cleaner to me than using
than my various experiments with
https://docs.rs/serde/latest/serde/de/trait.DeserializeSeed.html.
Further, since the `deserialize()` method from the `Deserialize` trait
is not async, we do not really have to worry about the deserialization
work being spread across multiple threads in a way that would interfere
with `AbsolutePathBufGuard`.
To start, this PR introduces the use of `AbsolutePathBuf` in
`OtelTlsConfig`. Note how this simplifies `otel_provider.rs` because it
no longer requires `settings.codex_home` to be threaded through.
Furthermore, this sets us up better for a world where multiple
`config.toml` files from different folders could be loaded and then
merged together, as the absolutifying of the paths must be done against
the correct parent folder.
This is a step towards removing the need to know `model` when
constructing config. We firstly don't need to know `model_info` and just
respect if the user has already set it. Next step, we don't need to know
`model` unless the user explicitly set it in `config.toml`
This PR moves `ModelsFamily` to `openai_models`. It also propagates
`ModelsManager` to session services and use it to drive model family. We
also make `derive_default_model_family` private because it's a step
towards what we want: one place that gives model configuration.
This is a second step at having one source of truth for models
information and config: `ModelsManager`.
Next steps would be to remove `ModelsFamily` from config. That's massive
because it's being used in 41 occasions mostly pre launching `codex`.
Also, we need to make `find_family_for_model` private. It's also big
because it's being used in 21 occasions ~ all tests.
