Adds the `[realtime].transport = "webrtc"` TUI media path using a new
`codex-realtime-webrtc` crate, while leaving app-server as the
signaling/event source.\n\nLocal checks: fmt, diff-check, dependency
tree only; test signal should come from CI.
---------
Co-authored-by: Codex <noreply@openai.com>
CHAINED PR - note that base is eternal/hooks-pretooluse-bash, not main
-- so the following PR should be first
Matching post-tool hook to the pre-tool functionality here:
https://github.com/openai/codex/pull/15211
So, PreToolUse calls for plain shell calls, allows blocking. This
PostToolUse call runs after the command executed
example run:
```
› as a test, run in parallel the following commands:
- echo 'one'
- echo '[block-pre-tool-use]'
- echo '[block-post-tool-use]'
⚠ MCP startup incomplete (failed: notion, linear)
• Cruising through those three commands in parallel now, and I’ll share the exact outputs right after
they land.
• Running PreToolUse hook: checking the observatory runes
• Running PreToolUse hook: checking the observatory runes
• Running PreToolUse hook: checking the observatory runes
PreToolUse hook (blocked)
warning: wizard-tower PreToolUse demo blocked a Bash command on purpose.
feedback: PreToolUse demo blocked the command. Remove [block-pre-tool-use] to continue.
PreToolUse hook (completed)
warning: wizard-tower PreToolUse demo inspected Bash: echo 'one'
PreToolUse hook (completed)
warning: wizard-tower PreToolUse demo inspected Bash: echo '[block-post-tool-use]'
• Ran echo '[block-post-tool-use]'
└ [block-post-tool-use]
• Ran echo 'one'
└ one
• Running PostToolUse hook: reading the observatory aftermath
• Running PostToolUse hook: reading the observatory aftermath
PostToolUse hook (blocked)
warning: wizard-tower PostToolUse demo blocked the Bash follow-through on purpose.
feedback: PostToolUse demo blocked the result after execution. Remove [block-post-tool-use] to
continue.
PostToolUse hook (completed)
warning: wizard-tower PostToolUse demo inspected Bash: echo 'one'
hook context: PostToolUse demo saw the Bash result. Response preview: one
──────────────────────────────────────────────────────────────────────────────────────────────────────
• Ran them in parallel. Little wave report:
- echo 'one' completed and returned one.
- echo '[block-pre-tool-use]' was blocked before execution by the PreToolUse hook.
- echo '[block-post-tool-use]' ran, but its result was blocked afterward by the PostToolUse hook.
The hook messages were:
- PreToolUse demo blocked the command. Remove [block-pre-tool-use] to continue.
- PostToolUse demo blocked the result after execution. Remove [block-post-tool-use] to continue.
› for the blocked messages (correctly blocked in this test) did the tool output land back into
context?
• Yeah, from this run:
- PreToolUse block: the command itself did not execute, so no command output landed in context. Only
the block message did.
- PostToolUse block: the command did execute, but the actual stdout did not come back into context.
Only the post-tool block message did.
So the blocked notifications landed in context, but the blocked command payloads themselves did not.
Nice clean guardrail, aloha.
```
- emit a typed `thread/realtime/transcriptUpdated` notification from
live realtime transcript deltas
- expose that notification as flat `threadId`, `role`, and `text` fields
instead of a nested transcript array
- continue forwarding raw `handoff_request` items on
`thread/realtime/itemAdded`, including the accumulated
`active_transcript`
- update app-server docs, tests, and generated protocol schema artifacts
to match the delta-based payloads
---------
Co-authored-by: Codex <noreply@openai.com>
This PR add an URI-based system to reference agents within a tree. This
comes from a sync between research and engineering.
The main agent (the one manually spawned by a user) is always called
`/root`. Any sub-agent spawned by it will be `/root/agent_1` for example
where `agent_1` is chosen by the model.
Any agent can contact any agents using the path.
Paths can be used either in absolute or relative to the calling agents
Resume is not supported for now on this new path
## Summary
Adds syntax highlighting to the TUI for fenced code blocks in markdown
responses and file diffs, plus a `/theme` command with live preview and
persistent theme selection. Uses syntect (~250 grammars, 32 bundled
themes, ~1 MB binary cost) — the same engine behind `bat`, `delta`, and
`xi-editor`. Includes guardrails for large inputs, graceful fallback to
plain text, and SSH-aware clipboard integration for the `/copy` command.
<img width="1554" height="1014" alt="image"
src="https://github.com/user-attachments/assets/38737a79-8717-4715-b857-94cf1ba59b85"
/>
<img width="2354" height="1374" alt="image"
src="https://github.com/user-attachments/assets/25d30a00-c487-4af8-9cb6-63b0695a4be7"
/>
## Problem
Code blocks in the TUI (markdown responses and file diffs) render
without syntax highlighting, making it hard to scan code at a glance.
Users also have no way to pick a color theme that matches their terminal
aesthetic.
## Mental model
The highlighting system has three layers:
1. **Syntax engine** (`render::highlight`) -- a thin wrapper around
syntect + two-face. It owns a process-global `SyntaxSet` (~250 grammars)
and a `RwLock<Theme>` that can be swapped at runtime. All public entry
points accept `(code, lang)` and return ratatui `Span`/`Line` vectors or
`None` when the language is unrecognized or the input exceeds safety
guardrails.
2. **Rendering consumers** -- `markdown_render` feeds fenced code blocks
through the engine; `diff_render` highlights Add/Delete content as a
whole file and Update hunks per-hunk (preserving parser state across
hunk lines). Both callers fall back to plain unstyled text when the
engine returns `None`.
3. **Theme lifecycle** -- at startup the config's `tui.theme` is
resolved to a syntect `Theme` via `set_theme_override`. At runtime the
`/theme` picker calls `set_syntax_theme` to swap themes live; on cancel
it restores the snapshot taken at open. On confirm it persists `[tui]
theme = "..."` to config.toml.
## Non-goals
- Inline diff highlighting (word-level change detection within a line).
- Semantic / LSP-backed highlighting.
- Theme authoring tooling; users supply standard `.tmTheme` files.
## Tradeoffs
| Decision | Upside | Downside |
| ------------------------------------------------ |
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
|
-----------------------------------------------------------------------------------------------------------------------
|
| syntect over tree-sitter / arborium | ~1 MB binary increase for ~250
grammars + 32 themes; battle-tested crate powering widely-used tools
(`bat`, `delta`, `xi-editor`). tree-sitter would add ~12 MB for 20-30
languages or ~35 MB for full coverage. | Regex-based; less structurally
accurate than tree-sitter for some languages (e.g. language injections
like JS-in-HTML). |
| Global `RwLock<Theme>` | Enables live `/theme` preview without
threading Theme through every call site | Lock contention risk
(mitigated: reads vastly outnumber writes, single UI thread) |
| Skip background / italic / underline from themes | Terminal BG
preserved, avoids ugly rendering on some themes | Themes that rely on
these properties lose fidelity |
| Guardrails: 512 KB / 10k lines | Prevents pathological stalls on huge
diffs or pastes | Very large files render without color |
## Architecture
```
config.toml ─[tui.theme]─> set_theme_override() ─> THEME (RwLock)
│
┌───────────────────────────────────────────┘
│
markdown_render ─── highlight_code_to_lines(code, lang) ─> Vec<Line>
diff_render ─── highlight_code_to_styled_spans(code, lang) ─> Option<Vec<Vec<Span>>>
│
│ (None ⇒ plain text fallback)
│
/theme picker ─── set_syntax_theme(theme) // live preview swap
─── current_syntax_theme() // snapshot for cancel
─── resolve_theme_by_name(name) // lookup by kebab-case
```
Key files:
- `tui/src/render/highlight.rs` -- engine, theme management, guardrails
- `tui/src/diff_render.rs` -- syntax-aware diff line wrapping
- `tui/src/theme_picker.rs` -- `/theme` command builder
- `tui/src/bottom_pane/list_selection_view.rs` -- side content panel,
callbacks
- `core/src/config/types.rs` -- `Tui::theme` field
- `core/src/config/edit.rs` -- `syntax_theme_edit()` helper
## Observability
- `tracing::warn` when a configured theme name cannot be resolved.
- `Config::startup_warnings` surfaces the same message as a TUI banner.
- `tracing::error` when persisting theme selection fails.
## Tests
- Unit tests in `highlight.rs`: language coverage, fallback behavior,
CRLF stripping, style conversion, guardrail enforcement, theme name
mapping exhaustiveness.
- Unit tests in `diff_render.rs`: snapshot gallery at multiple terminal
sizes (80x24, 94x35, 120x40), syntax-highlighted wrapping, large-diff
guardrail, rename-to-different-extension highlighting, parser state
preservation across hunk lines.
- Unit tests in `theme_picker.rs`: preview rendering (wide + narrow),
dim overlay on deletions, subtitle truncation, cancel-restore, fallback
for unavailable configured theme.
- Unit tests in `list_selection_view.rs`: side layout geometry, stacked
fallback, buffer clearing, cancel/selection-changed callbacks.
- Integration test in `lib.rs`: theme warning uses the final
(post-resume) config.
## Cargo Deny: Unmaintained Dependency Exceptions
This PR adds two `cargo deny` advisory exceptions for transitive
dependencies pulled in by `syntect v5.3.0`:
| Advisory | Crate | Status |
|----------|-------|--------|
| RUSTSEC-2024-0320 | `yaml-rust` | Unmaintained (maintainer
unreachable) |
| RUSTSEC-2025-0141 | `bincode` | Unmaintained (development ceased;
v1.3.3 considered complete) |
**Why this is safe in our usage:**
- Neither advisory describes a known security vulnerability. Both are
"unmaintained" notices only.
- `bincode` is used by syntect to deserialize pre-compiled syntax sets.
Again, these are **static vendored artifacts** baked into the binary at
build time. No user-supplied bincode data is ever deserialized. - Attack
surface is zero for both crates; exploitation would require a
supply-chain compromise of our own build artifacts.
- These exceptions can be removed when syntect migrates to `yaml-rust2`
and drops `bincode`, or when alternative crates are available upstream.
This add a new crate, `codex-network-proxy`, a local network proxy
service used by Codex to enforce fine-grained network policy (domain
allow/deny) and to surface blocked network events for interactive
approvals.
- New crate: `codex-rs/network-proxy/` (`codex-network-proxy` binary +
library)
- Core capabilities:
- HTTP proxy support (including CONNECT tunneling)
- SOCKS5 proxy support (in the later PR)
- policy evaluation (allowed/denied domain lists; denylist wins;
wildcard support)
- small admin API for polling/reload/mode changes
- optional MITM support for HTTPS CONNECT to enforce “limited mode”
method restrictions (later PR)
Will follow up integration with codex in subsequent PRs.
## Testing
- `cd codex-rs && cargo build -p codex-network-proxy`
- `cd codex-rs && cargo run -p codex-network-proxy -- proxy`
See https://rustsec.org/advisories/RUSTSEC-2026-0002.
Though our `ratatui` fork has a transitive dep on an older version of
the `lru` crate, so to get CI green ASAP, this PR also adds an exception
to `deny.toml` for `RUSTSEC-2026-0002`, but hopefully this will be
short-lived.
